English

Kayayyaki

JUT15-4X2.5-F（Ƙaramin Wutar Lantarki Din da aka Sanya a Waya Din da aka Sanya a Wurin Rarraba Wutar Lantarki) Hoton da aka Fito
  • JUT15-4X2.5-F (Ƙaramin Wutar Lantarki Din da aka Sanya a Waya Din da aka Sanya a Wurin Rarraba Wutar Lantarki)
  • JUT15-4X2.5-F (Ƙaramin Wutar Lantarki Din da aka Sanya a Waya Din da aka Sanya a Wurin Rarraba Wutar Lantarki)
  • JUT15-4X2.5-F (Ƙaramin Wutar Lantarki Din da aka Sanya a Waya Din da aka Sanya a Wurin Rarraba Wutar Lantarki)

JUT15-4X2.5-F (Ƙaramin Wutar Lantarki Din da aka Sanya a Waya Din da aka Sanya a Wurin Rarraba Wutar Lantarki)

Takaitaccen Bayani:

Don tubalan rarraba wutar lantarki, ana iya haɗa tubalan tashar tare da juna ta amfani da shafts na jagora.

Wutar lantarki mai aiki: 24 A, Wutar lantarki mai aiki: 690 V.

Hanyar wayoyi: Haɗin bazara na turawa.

Ƙarfin wayoyi masu ƙima: 2.5mm2.

Hanyar shigarwa: NS 35/7.5, NS 35/15.


Bayanan Fasaha

Bayanan Kasuwanci

Saukewa

Takardar shaida

Alamun Samfura

Riba

Ana iya shigar da shi a tsaye ko a layi ɗaya da layin dogo na DIN, wanda ke adana har zuwa kashi 50% na sararin layin dogo.

Ana iya shigar da shi ta hanyar layin DIN, shigarwa kai tsaye ko shigarwar manne, wanda ya fi sassauƙa don amfani.

Haɗin waya mai adana lokaci godiya ga fasahar haɗin da ba ta buƙatar kayan aiki.

Ana iya shigar da kayayyaki nan take ba tare da haɗa su da hannu ba, wanda hakan ke adana har zuwa kashi 80% na lokaci.

Launuka daban-daban, wayoyi sun fi bayyana.

Bayani

Hanyar haɗi A layi
Adadin layuka 1
Ƙarfin Wutar Lantarki 1
Adadin hanyoyin haɗi 4
Buɗe ɓangaren gefe NO
Kayan Rufewa PA
Matsayin hana harshen wuta, daidai da UL94 V0
Filin aikace-aikace Ana amfani da shi sosai a cikin haɗin lantarki, masana'antu, da sauransu.
Launi launin toka, launin toka mai duhu, kore, rawaya, kirim, lemu, baƙi, ja, shuɗi, fari, shunayya, launin ruwan kasa

Bayanan Wayoyi

Loda lambar sadarwa
Tsawon yankewa 8 mm — 10 mm
Sashen Giciyen Mai Tauri 0.14 mm² — 4 mm²
Sashen giciye mai sassaucin jagora 0.14 mm² — 2.5 mm²
Sashen Giciyen Mai Tauri AWG 26 — 12
Sashen Giciyen Mai Sauƙi AWG 26 — 14

Girman

Kauri 14.3mm
Faɗi 45.5mm
Tsawo 21.7mm
NS35/7.5 Mai Girma 31.1mm
Babban NS35/15 38.6mm

Yanayin muhalli

Zafin yanayi (aiki) -60 °C — 105 °C (mafi girman zafin aiki na ɗan gajeren lokaci RTI Elec.)
Zafin yanayi (ajiye/sufuri) -25 °C — 60 °C (na ɗan gajeren lokaci, ba zai wuce awanni 24 ba, -60 °C zuwa +70 °C)
Zafin yanayi (an haɗa) -5°C — 70°C
Yanayin zafi (aiwatarwa) -5°C — 70°C
Danshi da aka yarda da shi (ajiyewa/sufuri) Kashi 30% — Kashi 70%

Kayayyakin kayan

Matsayin hana harshen wuta, daidai da UL94 V0
Kayan Rufewa PA
Rukunin kayan rufi I

Sigogin Wutar Lantarki na IEC

Gwaji na yau da kullun IEC 60947-7-1
Matsayin gurɓatawa 3
Ajin ƙarfin lantarki mai yawa na uku
Ƙarfin wutar lantarki mai ƙima (III/3) 690V
Na'urar lantarki mai ƙima (III/3) 24A
Ƙarfin wutar lantarki mai ƙima 8kV

Gwajin aikin lantarki

Bukatu, faɗuwar ƙarfin lantarki Na ci jarrabawar
Sakamakon gwajin faɗuwar ƙarfin lantarki Na ci jarrabawar
Sakamakon gwajin hauhawar zafin jiki Na ci jarrabawar

Mai da hankali kan muhalli

RoHS Babu abubuwa masu cutarwa da yawa

Ma'auni da Bayani dalla-dalla

Haɗin kai na yau da kullun ne IEC 60947-7-1

Matakan kariya

1. Bai kamata a wuce matsakaicin ƙarfin wutar lantarki na na'urar ɗaurewa ɗaya ba.

2. Lokacin shigar da tashoshi da yawa gefe da gefe, ana ba da shawarar shigar da adaftar layin DIN a ƙasan wurin ƙarshe, ko kuma flange tsakanin tashoshin.

  • Na baya:
  • Na gaba:

    • Kayayyaki Masu Alaƙa

    Danna Shigar don bincike ko ESC don rufewa